Solarparts 100W 12V Flexible Solar Panel kit

Product Description
Maximum quantity available reached.
  • (Bendable ): The plastic back sheet can be curved to a maximum 30 degree arc and mounted on an RV, boat, cabin, tent, car, trucks, trailers or any other irregular surface.
  • (Lightweight): Ultralight and Ultra-thin ,Better applied to the carrier with weaker bearing, attached to the surface, no space,easy to install,
  • (Nice Details): The water resistant semi-flexible solar XINPUGUANG panel is far more durable than traditional glass and aluminum models, The junction box is sealed and waterproof.
  • (Practicality): Light energy converts electricity, Practical and suitable for use in areas where electricity is not available and where the city cannot reach, such as mountains, marine, deserts, and remote areas.
  • (Protection):The component contains a bypass diode, and the circuit uses input over current protection and reverse protection design.
  • Specification

    Maximum power:100w

    Maximum power voltage:18V

    Maximum power current:5.55A

    Open circuit voltage:21.6V

    Short circuit current:6.11A

    Size of module:1175X540X3mm

    Temperature Range:-20- +60 ℃

    Weight per piece: 2.2kg

    Length of Cables: 90cm

    Standard Test Conditions:AM1.5 100mw/cm2 25 ℃

  • Solar system kit wiring method and precautions

    1.The solar system kit connection is divided into parallel connection or serial connection. The controller must be first connect the battery , and then connect the solar panels.

    2.When the solar panels are connected in series or in parallel, paid to the highest PV input voltage of the controller. The voltage connected in parallel to the controller after the series connection cannot exceed the maximum input voltage of the controller.

    3. The total input power of the solar panel can't be greater than the rated power of the controller, otherwise, there is a risk of burning the controller.

    4. When the cable is connected to each component, the connection should be stable and there should be no looseness.

    5.The positive and negative poles of the controller and battery should be checked clearly. Do not reverse the positive and negative poles.

    6.When the power rating of one controller is insufficient to meet all solar panels, multiple controllers can be simultaneously connected to the battery.

Related products