Xinpuguang 100W 12V Flexible Solar Panel kit

$119.90 $149.90
Ship From:

✈ Solar Panel
Maximum power:100w
Maximum power voltage:18V
Maximum power current:5.55A
Open circuit voltage:21.6V
Short circuit current:6.11A
Size of module:1175X540X3mm
Temperature Range:-20- +60 ℃
Weight per piece: 2.2kg
Length of Cables: 90cm
Standard Test Conditions:AM1.5 100mw/cm2 25 ℃

✈ Controller
Batt voltage:12V/24V auto
Charge current:10A
Discharge current:10A
USB output:5V/2A
Operating temperature:-35~+60 ℃
suitable for :lead-acid batteries, lithium ions
Build-in short-circuit protection,open-circuit protection,reverse

✈ Packing list
1. 1pcs 100w solar panel
2. 10A 12v/24v charge controller
3. 1 set Extension cable with PV connector
4. 1 set cable with alligator clip (connect to battery)

• (Bendable ): The plastic back sheet can be curved to a maximum 30-degree arc and mounted on an RV, boat, cabin, tent, car, trucks, trailers, or any other irregular surface.
•(Lightweight): Ultralight and Ultra-thin ,Better applied to the carrier with weaker bearing, attached to the surface, no space,easy to install,
•(Nice Details): The water-resistant semi-flexible solar XINPUGUANG panel is far more durable than traditional glass and aluminum models, The junction box is sealed and waterproof.
•(Practicality): Light energy converts electricity, Practical and suitable for use in areas where electricity is not available and where the city cannot reach, such as mountains, marine, deserts, and remote areas.
•(Protection):The component contains a bypass diode, and the circuit uses input over current protection and reverses protection design.

Solar system kit wiring method and precautions

1. The solar system kit connection is divided into parallel connections or serial connections. The controller must first connect the battery and then connect the solar panels.

2. When the solar panels are connected in series or in parallel, paid to the highest PV input voltage of the controller. The voltage connected in parallel to the controller after the series connection cannot exceed the maximum input voltage of the controller.

3. The total input power of the solar panel can't be greater than the rated power of the controller, otherwise, there is a risk of burning the controller.

4. When the cable is connected to each component, the connection should be stable and there should be no looseness.

5. The positive and negative poles of the controller and battery should be checked clearly. Do not reverse the positive and negative poles.

6. When the power rating of one controller is insufficient to meet all solar panels, multiple controllers can be simultaneously connected to the battery.

We can provide free shipping for most of the products, for the EU and North America. However, some remote zip codes may require additional remote fees (especially remote islands). After the order is shipped, you will receive a shipping notification email with a tracking number and other information. You can check the status of the package through various official websites such as UPS, FedEx, DHL, USPS, Canada Post, DPD, etc. You can also query through our website, the query path is "support" --- "order tracking". Enter the tracking number to query.

Recently viewed