Xinpuguang

Xinpuguang 400W 12V Monocrystalline Flexible Solar Panel kit

$529.90 $661.90
ship from:
Quantity:

✈ Solar Panel Specification

【Solar Cell】Monocrystalline
【Maximum power】100w
【Maximum power voltage】18V
【Maximum power current】5.55A
【Open circuit voltage】22v
【Short circuit current】5.95A
【Size of module】1175X540X3mm
【Tolerance Wattage】 +/-5%
【Weight per piece】 2.2kg
【Temperature Range】-20- +60 ℃
【Junction Box Type】IP65
【Length of Cables】 90cm
【Cell Efficiency】 > 19.5%
【Module Efficiency】 > 19%
【Standard Test Conditions】AM1.5 100mw/cm2 25 ℃
【Temperature coefficients of Isc (%)】0.065+/-0.015%/ ℃
【Temperature coefficients of Voc (%)】-(2.23+/-0.1) / ℃
【Temperature coefficients of Pm (%)】-(0.5+/-0.05)/ ℃
【Temperature coefficients of Im (%)】 +0.1/ ℃
【Temperature coefficients of Vm (%)】-0.38/ ℃

✈ Controller Specification

Nominal system voltage :12/24VDC
Auto Battery input voltage range: 9V~32V
Rated charge/discharge current :30A@55℃
Max. PV open circuit voltage :50V
Battery type :Sealed(Default) / Gel / Flooded
Enclosure :IP30
USB output :5VDC/2.4A(Total)
Mounting dimension :172x80mm
Mounting hole size: Φ5.0mm
Net weight:0.55kg

✈ packing list

100W*4 pcs flexible solar panel
1 piece 30A solar controller,
1*3M cable with PV Connector
1*3M cable with alligator clip
4 in 1 in parallel connector

✈Practicality: This solar panel kit can be used as a 12V off-grid system.suitable for use in areas where electricity is not available and where the city cannot reach, such as mountains, marine, deserts, and remote areas.
✈Easy Installation: The solar panel has 6 grommet mounting holes are available to attach fasteners,and can also be installed with silicone and adhesive tape.
✈Flexible: This panel is a good choice for curved surfaces of RV, boat,yacht,truck, car, cabin, camper , tent , trailer, golf cart or any other irregular surface.
✈Reliable: Advanced encapsulation material with multi-layered sheet laminations to enhance cell performance and provide a long service life.
✈What you get: 100W*4 pcs flexible solar panel, 1 piece 30A solar controller, 1*3M cable with PV Connector,1*3M cable with alligator clip,4 in 1 in parallel connector

1. The solar kit connection is divided into parallel connection and serial connection. The controller must first connect the battery, and then connect the solar panels.

2. solar panels connected in series or in parallel, attention should be paid to the highest PV input voltage of the controller. The voltage connected in parallel to the controller after the series connection cannot exceed the maximum input voltage of the controller.

3. The total input power of the solar panel cannot be greater than the rated power of the controller, otherwise, there is a risk of burning the controller.

4. The cable is connected to each component, the connection should be stable and there should be no looseness.

5. The positive and negative poles of the controller and battery should be checked clearly. Do not reverse the positive and negative poles.

6.When the power rating of one controller is insufficient to meet all solar panels, multiple controllers can be simultaneously connected to the battery.

We can provide free shipping for most of the products, for the EU and North America. However, some remote zip codes may require additional remote fees (especially remote islands). After the order is shipped, you will receive a shipping notification email with a tracking number and other information. You can check the status of the package through various official websites such as UPS, FedEx, DHL, USPS, Canada Post, DPD, etc. You can also query through our website, the query path is "support" --- "order tracking". Enter the tracking number to query.

Recently viewed