Xinpuguang

Xinpuguang 180W 16V Monocrystalline Flexible Solar Panel kit

$216.90 $270.90
ship from:
Quantity:

 

✈ Solar Panel
Maximum power(Pmax) 90W
Maximum system voltage 700V DC
Open circuit voltage(Voc) 19.2V
Short circuit current(Isc) 6.87A
Maximum power voltage(Vmp) 16V
Maximum power current(Imp) 5.62A
Operating temperature(NOCT) 45±2℃
Temperature range -20℃~+80℃
Weight 2KG
Size 1050*540*3 mm
Standard Test Conditions : lrradiance 1000w/m2,Temperature 25℃,AM=1.5

✈ 20A charge controller
Battery voltage:12V/24V auto
Charge current:20A
Discharge current:20A
USB output:5V/2A
Self-consume:<10mA
Operating temperature:-35~+60 ℃
suitable for :lead acid batteries, lithium ions
Build-in short-circuit protection,open-circuit protection,reverse

✈ Packing list:
2pcs 90w solar panel
1pcs 12v/24v/20A charge controller
1set 3M cable with PV connector
1set 3M cable with alligator clip(connec to battery)
1set 2 in 1 parallel adapter

a. This product must not be in contact with highly corrosive substances to avoid excessive bending and long-term bending;
b. The solar panel should be prevented from stacking and falling down, the solar flexible panel cannot be disassembled, do not collide with hard objects, avoid trampling, and avoid scratching the surface with hard objects during use;
c. A large number of scratches or dirt on the surface of the solar panel may result in low efficiency of the solar panel, which may seriously cause burnout;
d. The suitable ambient temperature range of solar panels: -20 ℃-80 ℃, do not exceed this range;
e. The solar panel must be installed in an area with good sunlight and no shadow. The solar panel may work in the shaded sunlight for a long time and there may be a risk of burnout;
f. When used in series connection, the "+" of the previous component is connected to the "-" of the next component. The same panel cannot be directly connected to the positive and negative poles.

Solar panel connection installation method

When you use a 12V battery, use a parallel connection; when you use a 24V battery, use two serial connections. Please install the solar panel on a smooth surface with good sunlight and no shadow, and try not to install it on uneven areas. Solar panels can be fixed with glue or bolts.

Connection

1. Connect the battery to the charge regulator - plus and minus.
2. Connect the photovoltaic module to the regulator - plus and minus.
3. Connect the consumer to the charge regulator - plus and minus. The reverse order applies when deinstalling ! An improper sequence order can damage the controller!

We can provide free shipping for most of the products, for the EU and North America. However, some remote zip codes may require additional remote fees (especially remote islands). After the order is shipped, you will receive a shipping notification email with a tracking number and other information. You can check the status of the package through various official websites such as UPS, FedEx, DHL, USPS, Canada Post, DPD, etc. You can also query through our website, the query path is "support" --- "order tracking". Enter the tracking number to query.

Recently viewed